网站公告:

产品中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 气液增压器与气液增压泵的

气液增压器与气液增压泵的区别?

发布时间:2017-08-04 18:20:23   发布人:
  气液增压器与气液增压泵,原理都是大活塞推动小活塞,由于面积差,使液体压力放大,F=但两个的本质区别在于,气液增器一般为单个往复运动,不连续运动,进出口没有单向阀,外挂油杯,一般用压力脉冲,冲压等场合;气液增压泵能依靠自身的换向阀,接通压缩空气连续往复运动,进出口装有单向阀,出液连续,一般用于压力检测。
Gas-liquid supercharger and gas-liquid booster pump, principle, piston push small piston due to the poor area, makes liquid pressure amplifier, F = but the essential difference between the two is that the apparatus of gas liquid into a single general reciprocating motion, discontinuous movement, no check valve of imports and exports, external oil cup, generally with the pressure pulse, stamping and other occasions; The air - hydraulic booster pump can rely on its own reversing valve, which can be connected with the continuous reciprocating motion of compressed air. The import and export is equipped with a one-way valve, which is continuously used for pressure detection.

  气体增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体,输出气压可通过驱动气压无级调节。输出流量大:只需0.3-0.8MPa压缩空气驱动就可获得较大的输出流量工作时,迅速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力,此时消耗能量很小,无热气体增压泵量产生,无零件运动。当压力平衡打破后,气动增压泵自动开始工作到下一个平衡。
The gas pressure pump USES the low pressure gas at the end of a large area to produce a high pressure fluid at the piston end. It can be used to compress air and other gases. The output pressure can be adjusted by driving pressure. Output large flow: 0.3-0.3 MPa compressed air drive can obtain larger output flow work, reciprocating work quickly, as the output pressure is close to the set pressure value the reciprocating motion of the pump speed slow down until it stops. And maintain the pressure, the energy consumption is very small at this time, no hot gas pressure pump volume generation, no part movement. When the pressure balance is broken, the pneumatic booster pump automatically begins to work to the next equilibrium.
  材质优良高压部分材质为不锈钢。高压柱塞材质为不锈钢,并采用双层密封。维护简单气动增压泵的零件及密封少,维护简单且成本低。相同系列泵的所有"O"型圈,维修包易损部件可相互替换,大大降低了维修成本。气动增压泵出厂前已加注润滑剂,工作时无需外部润滑。
Material quality high voltage part of stainless steel. The high pressure plunger is made of stainless steel and double sealed. It is easy to maintain simple and low cost. All "O" loops of the same series of pumps can be replaced with each other, which greatly reduces the maintenance cost. The pneumatic booster pump has been filled with lubricant before leaving the factory without external lubrication.
  我公司致力于为用户提供值得信赖的优良产品。我们期待与您建立长期的战略合作关系,为您提供优良的质量和完善的服务体系。
Our company is committed to providing customers with excellent products. We look forward to establishing a long-term strategic partnership with you to provide you with excellent quality and perfect service system.

13188935873

qq

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!