The gas-liquid booster pump uses the built in single pneumatic control two position four way valve to realize the pump's active reciprocating motion. This series of products is designed and manufactured by our company after digestion and absorption of similar products abroad. Aluminum alloy and oxidation treatment are used in the gas drive part, and carbon steel or stainless steel can be selected according to the different medium.
The drive piston diameter of the series is 80mm, and air pressure is 8bar.
The main functions and characteristics of high pressure pneumatic liquid supercharging pump are:
The high output pressure: the maximum output pressure of the liquid can be as high as 300MPa.
The scope of application is wide: working medium for hydraulic oil, water and most chemical non corrosive liquids, and high reliability.
The output of all types of wide scale pump only needs smaller air pressure can work smoothly, conditioning intake pressure can obtain the flow and pressure of different.
The use of sensitive: choose different types of pumps, available in different pressure regions.
The active pressure: no matter what the original formation pressure holding circuit pressure drop ceist pump will take the initiative to start, make up the pressure, insist on constant pressure circuit.
The safe operation: the gas driven, no arc and spark in place using risk.