The pressurized pump uses the low pressure gas (2 - 8bar) of the large area piston to produce high pressure gas / liquid on the small area piston. It can be used to compress air and other gases, and the output pressure can be stepless by driving pressure.
The gas pipeline booster pump has a single action pump and a double acting pump. The double acting pump gas piston compresses the gas in the two stroke cycles. When the driving gas is acting on the gas piston, the working piston can get a larger output flow with the gas driven. The maximum working pressure of the pressurized pump of the pneumatic liquid pipe can reach 700Mpa, and the working pressure of the pneumatic gas pipeline booster pump can reach 300 Mpa. The high pressure part of the pressurized pump is made of stainless steel for hard aluminum alloy high pressure plunger, and double seal is used. The material of the key parts can be selected according to the medium.
1, high cost performance, supercharging pump has the characteristics of high output performance and low cost.
2. Most of the pipe booster pumps adopt centrifugal pumps. It has a wide range of performance, mature manufacturing technology, and easy to use and maintain.
3, the operation is convenient and reliable, the adjustment and maintenance are easy, and it is easy to realize automation and long distance operation.
4. It is adjustable, and the pressure and flow of the booster pump are accurately adjusted by the pressure regulating valve of the driving gas.
5, high speed, can be directly connected with the motor and steam turbine, the transmission mechanism is simple and compact.
6, using the pipeline structure (inlet and outlet in line with) design, installation is very simple, only need to butt the inlet and outlet can be maintained; such as non pump failure, can not remove line part can pump maintenance.
7, the structure is simple and compact, small volume, light weight, less components, easy fabrication, low cost and small floor area, so its equipment and repair costs are relatively low.